D tech Compomax Composite Composite Intro Kit

Prior to preparation, clean the tooth, and remove all cleaning residues with a water spray. Determine the vita tooth shade. Use a rubber dam where possible. Prepare the cavity according to the general rules of adhesive technology. Round off enamel edges and protect pulp areas. Etch as required, according to your preferred technique, e.g. etch plus. Follow the instructions for using the materials used. Apply bond primer. (AQ Bond) Apply a lining of thin-flowing composite (compo Flow) or compomer as required. We recommend using a matrix. Fill the cavity in the required shade in layers of a maximum of 2 mm thickness. Light-cure each layer for 40 seconds. Surplus removal, contouring, and fine shaping are carried out e.g. With a diamond finisher and flexible discs of decreasing grain size. High-gloss polishing can be carried out with a polishing paste using polishing cups/discs.

High compressive strength High flexural strength Low shrinkage Easy to sculpt Does not stick to instrument

4 x 4g Light Cured Universal Composite Syringe 1 x 2.5g Etching gel syringe 1 x 5ml Single step 5th generation bonding agent 50 x Fibred Applicator tips 20 x Angled tips

11/2027

1.Service and Warranty are handled by the manufacturer/importer directly for this product 2. Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and meddent.in may assist the customer in registering a request to get the Product replaced or serviced. 3.meddent.in will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer 4.The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.