Dentaxon Eugenol 110ml

Eugenol and zinc oxide powder are mixed together to form a paste having proper working consistency. The exact powder/liquid ratio is determined as per requirement and user’s preference. Guidelines for preparing the paste are as follows: Use a clean and dry cement spatula and a glass slab for mixing zinc oxide with eugenol. Dispense a few drops of eugenol onto the glass slab. Dispense a small amount of zinc oxide powder onto the slab, separate from the previously dispensed eugenol. Drag a small amount of the zinc oxide powder with the help of the spatula into the eugenol. Drag over just enough that can be easily incorporated using a swirling motion of the spatula against the glass slab. Mix until a smooth paste consistency is achieved. Continue adding zinc oxide powder into the mixture until the desired working consistency is reached. Note that slightly heavier consistencies for use as a base can be made by simply incorporating additional zinc oxide powder into the mix. Pure Eugenol (Oil of Cloves) Used with Zinc Oxide Powder for Temporary Fillings. The setting time varies with the mixing ratio and is dependent on temperature and humidity (higher temperatures and a more humid environment decrease the setting time).

Extra pure Eugenol oil Uniform paste consistency Combined with zinc oxide to form a sedative dressing For temporary relief of localized dental pain Perfect momentary sealant and filling material for cavities after removing of carious dentine before the permanent restoration. Flawless cavity liner. Momentary fixation of crowns and bridges. Perfect cavity liner under maximum restorative materials. Used for temporary relief of limited dental pain. Chemically pure with increased efficiency. Forms uniform paste dependability when putting together with Zinc Oxide. Forms a sedative dressing or lining under non-fused resin when putting together with Zinc Oxide.

1 bottle

9/2028

1.Service and Warranty are handled by the manufacturer/importer directly for this product 2. Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and meddent.in may assist the customer in registering a request to get the Product replaced or serviced. 3.meddent.in will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer 4.The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be