Limited Combo offer Sale

Wizdent Wonder Lute Universal Refill Cementation of Inlays, Onlays, Crown And Bridges 1. Try In Restoration Perform a try in of the restoration to ensure proper fitcheck. 2. Prosthesis Preparation The prosthesis is to be prepared as per manufacturers instructions. 3. Tooth Preparation Thoroughly clean the tooth surface with pumice and water to remove biofilm. Use of rubber dam is recommended to isolate the prepared teeth. Slightly dry in 2-3 intervals with oil free air. AVOID OVERDRYING. 4. Pulp Capping In case of a deep cavity, protect with an appropriate pulp capping agent. Do not use a eugenol containing liner. 5. Cementation i. Uncap the double syringe cartridge. Gently press the plunger to disperse pastes from both the barrels onto a mixing pad ensuring that both the pastes are flowing evenly at the same level. ii. Clean the nozzle tip with gauze after dispensing and replace the cap securely. iii. Mix the dispensed paste using a plastic spatula for 20 secs. Apply a uniform coat on the luting side of prosthesis... Cementation of Posts 1. Post Space Preparation Use of rubber dam is recommended to isolate the tooth. Prepare the post space perform a try-in to ensure proper size and fit of the post. Rinse the post space with water and dry with paper points. 2. Preparation of Post Prepare the post as per manufacturers instructions. 3. Material Application i. Attach an Endo-Tip to a mixing cannula securely. ii. Insert the Endo-Tip as deep as possible into the root canal while applying Wonder Lute Universal and dispense the material starting apically. iii. Ensure keeping the endo-tip in the material to avoid bubbles. iv. Remove the endo-tip when the root canal has been filled completely. v. If necessary apply a thin layer of Wonder Lute Universal on the post. vi. Seat and rotate the post slightly upon insertion to avoid air entrapment. Secure the post in its position under moderate pressure. vii. Light cure the coronal part of the post for 20 seconds. The core build up can now be carried out using suitable restorative material such as Wonder Bulk Filler etc. Veneer Restorations: It is ideal for cementation of 1-2 units at a time. Tooth Preparation: Thoroughly clean the tooth surface with pumice and water to remove biofilm. Use of rubber dam is recommended to isolate the prepared teeth. Slightly dry in 2-3 intervals with oil free air. AVOID OVERDRYING. Adhesive Application: Apply suitable LC adhesive such as Select Bond TE/Wonder Bond SE as per manufacturer’s instructions for use. Cementation: i. Uncap the double syringe cartridge. Gently press the plunger to disperse pastes from both the barrels onto a mixing pad ensuring that both the pastes are flowing evenly at the same level. ii. Clean the nozzle tip with gauze after dispensing and replace the cap securely. iii. Mix the dispensed paste using a plastic spatula and dispense the cement directly onto the internal surface of the veneer. iv. Place the veneer gently onto the tooth, allowing the cement to slowly flow from all margins. Light Curing: Light cure for about 10 secs and remove excess material with the help of scaler or explorer. Light cure all marginal areas of restoration for 20 seconds from each direction. It is strongly recommended to Light Cure the restoration. Refer to the recommended working, setting and curing times given for Cementation of Inlays, Onlays, Crown And Bridges. Wizdent Wonder Edge DC Core & Resin Cement Refill - Chromatic Tooth Preparation: Clean and prepare the tooth surface following standard protocols. Ensure isolation to prevent contamination Etching and Bonding (if required): If using with a bonding agent, apply it according to the manufacturer’s instructions and cure appropriately Dispense Material: Load the dual-syringe cartridge into an appropriate dispensing gun. Attach a mixing tip and dispense directly into the prepared area Core Build-Up: For core build-up, shape the material using suitable instruments. Its stackable consistency allows free-hand sculpting Post Cementation: For post cementation, inject the material into the canal and seat the post. Hold it in position Crown/Inlay Cementation: Apply material onto the restoration and seat it properly. Remove excess cement Curing: Light-cure as needed. Dual-cure ensures complete set even in deeper areas

Wizdent Wonder Lute Universal Refill Cementation of crowns and bridges made of metalporcelain-fused-to-metal PFM. Cementation of all-ceramic, inlays, onlays, crowns and bridges zirconium oxide, lithium disilicate and aluminium oxide. Cementation of endodontic posts fibre-reinforcedmetal. Cementation of all ceramic, resin and metal restorations to implant abutments Wizdent Wonder Edge DC Core & Resin Cement Refill Is a dual-cure, high-performance material designed for reliable core build-ups and permanent cementation of posts and crowns. Its innovative formulation offers dual viscosity—firm for easy sculpting during core build-up and flowable under pressure for precise post and crown placement. This 3-in-1 material ensures enamel-like hardness, allowing ditch-free, smooth crown preparation. With high compressive and flexural strength, it delivers durable, monobloc restorations from post to crown. The minimal polymerization shrinkage enhances marginal integrity and long-term performance. Available in two shades, Chromatic and Blue, it provides excellent visual contrast during tooth preparation. Its dual-cure feature ensures thorough setting even in hard-to-reach areas, offering flexibility, strength, and ease of use for restorative procedures.

Wizdent Wonder Lute Universal Refill 1 x 5ml Syringe Wizdent Wonder Edge DC Core & Resin Cement Refills 1 x 5ml Syringe 10 x Automix Tips 10 x Endo Tips

1.Service and Warranty are handled by the manufacturer/importer directly for this product 2. Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and meddent.in may assist the customer in registering a request to get the Product replaced or serviced. 3.meddent.in will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer 4.The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be