Waldent Air Scaler

The Scaler connection portion connected with a comprehensive treatment of the handpiece tube. The scaler connection portion connects with the handpiece tube well after the insertion and fixed screw nut. Confirm the Scaler pipe connecting portion completely with the handpiece tube. The Scaler twists in the opposite direction connection tube on the handpiece when it is removed from the tube. This product is a dentist specialty on the surface of the patient's Plaque; tartar also is used to remove the color of dental treatment. About the scaler tip (the insert of the air scaler) About the tips modes: With 3pcs scaling tips as a gift, suitable tips are chosen for the right treatment. Tips for installation and unloading: Must use the disinfected tips, and should wear gloves when loading and unloading it. Put the tips into the snap within the head of the air scalar. The thread of the tip should be screwed as clockwise onto the scaler, and then tighten it by the wrench, be careful not to over-tighten. Please note that during installation, the hand should hold the scaler body rather than the device during the installation process. Please remove the tip according to the counterclockwise turn right. Sent from my iPhone

Design: Stylish Design and Comfortable Handling Less Heat Generation: Less heat generation occurs during operation, so less cooling water is used. Connection: Air-driven with Borden 2-hole connection compatible with most dental chairs Tips: Three different size tips can be used for requirements Disinfection: Autoclavable at 121 °C effectively to avoid cross-infection

1 x Air Scaler Handpiece 3 x Scaler Tips (G1 , G2, G4) 1 x Key/chuck

1.Service and Warranty are handled by the manufacturer/importer directly for this product 2. Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and meddent.in may assist the customer in registering a request to get the Product replaced or serviced. 3.meddent.in will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer 4.The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.