Waldent Maxcure 9 one second Light Cure Unit

1 Second curing light
Large-capacity lithium battery
Shutdown automatically without any operation in 40 sec
Low battery warning
Covered by ABS painting
5W powered LED
High articulation optical fiber
Automatic Standby/Automatic shutdown
5W strong power LED lamp
Light power more than 2000mw/cm²
When Full charged can be used over 200 times

Light cure unit is used for the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time, it is used to restore teeth .

INDICATION :

Used for polymerization of light cure resin-based composites. It can be used on several different dental materials that are curable by light.
ADVANTAGE :

Especially designed to cause no fatigue to dentists hand.
Large-capacity lithium battery.
Shutdown automatically without any operation in 40 sec.
Low battery warning.

Power Supply - Rechargeable Lithium Battery
Battery voltage & capacity - 3.7V/2600mAh
Battery Model - ICR18650
Power Input - 100-240VAC, 50Hz/60Hz
Power Output - DC 5V/1A
Dimensions - ⌀72mm x 275mm
Light Intensity - 1000mW/cm2 - 2500mW/cm2
Light Source:5W high power blue LED
Wavelength - 385nm - 515nm
Net Weight - 255grams
Power Consumption - ≤ 5W
Software version - 1.0.0
probe dia - 9mm
probe length - 7.3cms
Total unit length - 25.5cms
Mode Setting:

TURBO mode - Display P1, Light Intensity 2300mW/cm2 - 2500mW/cm2
NORMAL mode - Display P2, Illumination 1000mW/cm2 - 1200mW/cm2
Time Setting:

TURBO mode : 1s, 3s
NORMAL mode : 5s, 10s, 15s, 20s
Lightly press the time button to choose the solidification time.

1 x Main Unit
1 x Pedestal Charger
1 x Adapter
1 x Light Guide
1 x Light Hood
2 x "O" Ring
1 x Disposable sleeves Box (Pack of100)
1 x Instructions Manual
1 x Packaging list
1 x Quality certificate
1 x Warning card

1.Service and Warranty are handled by the manufacturer/importer directly for this product

2. Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and meddent.in may assist the customer in registering a request to get the Product replaced or serviced.

3.meddent.in will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer

4.The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or is not tampered as the case may be.